Differences

This shows you the differences between two versions of the page.

--- bug_report [2015/09/09 07:04] – RAJjAAbtsCwVSiEz 146.185.234.48
+++ bug_report [2015/10/22 09:35] (current) – old revision restored (2013/04/04 00:21) macke
@@ Line 1: / Line 1: @@
-http://generictoprolxl.gq/#8653 toprol xl 100mg,
+=== Bugs ===
+== ReMagX 2.2  ==
+  * The "show layer and electric field" produces a floating error for high qz
+  * The fit of multiple curves does not work with Levenberg-Marquardt algorithm
+  * Error if you load an empty file
+  * Wrong display if you delete one active dataset
+  * Map is crashing if you have no .db files
+  * The chi^2 error during fit in the debug window shows the last calculated error and not the best one.
+== ReMagX 1.9.5  ==
+  * Instabilities when fitting with parallel computing
+  * The "show layer and electric field" produces a floating error for high qz
+  * Simplex will not work correctly if initial value is the same number as one of the boundary values.
+  * The fit of multiple curves does not work with Levenberg-Marquardt algorithm
+  * Error if you load an empty file
+  * Wrong display if you delete one active dataset
+  * Map is crashing if you have no .db files
+  * The chi^2 error during fit in the debug window shows the last calculated error and not the best one.
+== ReMagX 1.9.2  ==
+  * The "show layer and electric field" produces a floating error for high qz
+  * Simplex will not work correctly if initial value is the same number as one of the boundary values.
+  * The fit of multiple curves does not work with Levenberg-Marquardt algorithm
+  * Error if you load an empty file
+  * Wrong display if you delete one active dataset
+  * Map is crashing if you have no .db files
+  * The ch9i^2 error during fit in the debug window shows the last calculated error and not the best one.
+== ReMagX 1.8.x  ==
+  * Crash if dataset "empty" is activated and "use measurement x-range for simulation" is not activated.
+  * The maximum energy range calculation for energy scan does not work correctly. You have to do it manually. This affects calculations in which "use measurement x-range for simulation" is not activated
+  * Dichroic calculation mode takes the optical constants always from the cache if it can find the proper entries.
+  * Simplex will not work correctly if initial value is the same number as one of the boundary values.
+  * The fit of multiple curves does not work with Levenberg-Marquardt algorithm
+  * Crash for "evolution fit" at least for Windows 7.
+  * Error if you load an empty file
+  * Wrong display if you delete one active dataset
+  * Precision is not saved in file
+  * Map is crashing if you have no .db files
+  * Script does not show correct error messages (Sometimes no error even if there is an error)
+  * The ch9i^2 error during fit in the debug window shows the last calculated error and not the best one.
+== ReMagX 1.7.0  ==
+  * The maximum energy range calculation for energy scan does not work correctly. You have to do it manually. This affects calculations in which "use measurement x-range for simulation" is not activated
+  * Simplex will not work correctly if initial value is the same number as one of the boundary values.
+  * The fit of multiple curves does not work with Levenberg-Marquardt algorithm
+  * Crash for "evolution fit" at least for Windows 7.
+  * Error if you load an empty file
+  * Wrong display if you delete one active dataset
+  * window minimizing does not work
+  * Precision is not saved in file
+  * Map is crashing if you have no .db files
+  * Script does not show correct error messages (Sometimes no error even if there is an error)
+  * The ch9i^2 error during fit in the debug window shows the last calculated error and not the best one.
+== ReMagX 1.6.0 (build 43) ==
+  * Simplex will not work correctly if initial value is the same number as one of the boundary values.
+  * Crash if one choses the wrong "What to fit" radiobutton
+  * Error if you load an empty file
+  * Wrong display if you delete one active dataset
+  * window minimizing does not work
+  * Dic Reflectivity, Parrat and Pi Light doesn't work
+  * Precision is not saved in file
+  * Do not remove or add layers as long as fitting variables are activated
+  * Script does not show correct error messages (Sometimes no error even if there is an error)
+  * The ch9i^2 error during fit in the debug window shows the last calculated error and not the best one.